CMZTECH.NET
  • Blog
  • Graphics
  • Virtual Reality
  • 3D Printing
  • Fun Stuff
  • Contact

Getting started with Elegoo Nano

11/8/2022

0 Comments

 
These are pretty much just notes to myself.
  • Run the web ide and follow instructions to install the Arduino agent and arduino drivers 
  • Download and install the elegoo drivers 
  • Select the correct device (Arduino Nano and processor).
  • Mod blink demo to run at different rate to the one already on the board and run it.
Picture
Well, that turned out to be remarkably drama free.... 
Now I just need to wait for some more pots to arrive so I can control multiple lights from the same board.
Picture
0 Comments



Leave a Reply.

    David Coombes

    Making stuff

    Categories

    All
    3D Graphics
    3D Printing
    3D Scanning
    AI
    Blender
    Cycling
    Development
    Environment
    Futurism

    Archives

    February 2023
    November 2022
    April 2022
    February 2022
    January 2022
    February 2021
    January 2021
    November 2020
    May 2020
    April 2020
    March 2020
    February 2020
    December 2019
    November 2019
    September 2019
    August 2019
    July 2019
    January 2019
    December 2018
    October 2018
    August 2018
    June 2018
    April 2018
    March 2018
    February 2018
    January 2018
    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    January 2017
    September 2016
    August 2016
    July 2016
    May 2016
    April 2016
    March 2016
    December 2015
    November 2015
    August 2015
    July 2015
    June 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    November 2014
    October 2014

    RSS Feed